A Guide on How to Choose the Right Plumbing Pipes for Your Home

When installing pipes in your plumbing system, you may be confused about which type to choose. You may be unfamiliar with the terms ABS, PEX, and PP. Listed below is a guide on how to choose the right pipes for your home. If you have any questions, or a detailed breakdown here feel free to ask us in the comments section below! We’ll do our best to answer your questions in the best possible way! Just follow the steps below to make your life easier.

PEX tubing

When it comes to PEX piping, it’s important to know which diameter is right for your project. For short lines of up to 250 feet, 3/8-inch PEX pipe will do. For longer lines, however, you’ll need 1/2″ or 3/4-inch PEX tubing. The following guide will help you determine which size to purchase. Then, check the size of your pipes by looking at the joints. PEX pipe can be identified by its PEX-A Ring/Sleeve. Whether you choose PEX A, B, or C, it will be clearly labeled on the piping itself.

Regardless of the pipe size you need for your plumbing project, PEX tubing comes with several fitting options. For best results, you should choose fittings designed for PEX, such as push-to-connect fittings. While not all fitting systems are made for PEX, they will usually be labeled with an ASSE 1061 designation. PEX pipe and fittings have similar qualities, so choosing the right kind will depend on your budget and experience. In some cases, PEX pipe is simply not available in your area.

ABS piping

There are many benefits of using ABS piping for plumbing, including its ability to resist corrosion. It will never flake, peel, dissolve, or fade. It is also highly resistant to extreme temperatures. Many people choose ABS piping for drain systems and electrical insulation. Below are some of the benefits of ABS piping. It is the cost-effective choice for commercial and residential use. It won’t leak unless it’s punctured.

ABS is a black plastic pipe that is similar to PVC, but is less flexible and susceptible to degradation. While PVC pipes are more resistant to warping and deterioration, ABS pipes are relatively easy to install and hold up well to underground pipework. Before installing ABS piping, consult a plumbing professional and check local regulations for installation. This guide will help you decide which plastic pipe type is right for your home.

Stainless steel piping

Stainless steel is corrosion-resistant, beautiful, low maintenance, and has almost limitless uses in plumbing. Unlike carbon steel, stainless steel pipes have a very low rate of corrosion. In addition, corrosion is not as bad as it can be with other materials, and its constituent alloys are well within the limits allowed for products that come into contact with drinking water. Moreover, stainless steel does not rust easily and is highly resistant to ultraviolet light and soil, making it an excellent choice for water delivery in hospitals and public buildings.

Besides stainless steel piping, the other most popular types of plumbing pipes are brass and plastic. Although plastic is lighter and easier to work with, many old-school contractors still prefer using metal piping for water and sewer plumbing. Stainless steel pipe is durable and low-maintenance, and the material is easy to work with. Regardless of your plumbing needs, you can trust that stainless steel is the right choice.

PP piping

When choosing PP piping, you have a few things to consider. The material code for PE is a four-digit number that identifies the cell of the pipe, which controls its density, tensile strength, and slow growth crack resistance. The second two digits determine the recommended hydrostatic design stress category and determine the pipe’s long-term strength. Usually, pipe sizing criteria are based on these values.

There are several benefits of PP piping, such as its high-temperature resistance. Polypropylene pipe also works well in basic and acidic fluids, including water. However, it does not stand up to solvents. These benefits make PP piping the most cost-effective choice for many manufacturing facilities. Here are some tips on choosing PP piping:

Copper piping

There are many reasons to choose copper piping for your plumbing project. Copper is a highly reliable and durable material that can handle both hot and cold water. This material can also be recycled. However, copper is rigid and can be difficult to install in tight spaces. It is also the most expensive type of plumbing pipe and will only become more expensive as the price of copper increases. Nevertheless, you can find a variety of benefits from copper piping for your plumbing project, and the cost is worth it.

Copper pipes have many advantages over PEX piping. PEX pipes are easy to install and require no soldering or connectors. Unlike copper, PEX pipes don’t require soldering, so there’s no need to call a plumber in San Fernando Valley if you want to use them. Copper pipes have a longer shelf life, but they also tend to cause mineral buildups. They also tend to use more water and are less compatible with manifold systems.

Brass piping

If you are planning to install a plumbing system, you should know how to choose the right pipe size for your installation. Pipes can either be straight or have bends. Some are easy to connect. Others come with female or male threading on the outside. Regardless of the pipe size, you should check the available connectors. The type of pipe you choose must match the type of connectors used for the installation.

PVC, copper, and ABS are popular choices. However, both have their pros and cons. For example, PVC is better for outdoor installations than ABS. Compared to ABS, PVC is more flexible, makes fewer leaks, and is stronger. While PVC is more durable and less likely to warp in the sun, ABS is easy to install and holds up well in underground pipes. Before using either of these options, talk to a plumber. Also, remember to check local regulations before installing either one.

Candu Plumbing & Rooter
22144 Eccles St, Canoga Park, CA 91304
(855) 522-2638